AVAILABLE NOW! Our new Grand Slam 900 Masthead Anchor Light was created specifically for the safety and convenience of today’s boater. Climbing on the boat gunnel to raise and lower a masthead anchor light is dangerous, time consuming and frustrating. The GS-900 allows boat operators to lift and descend this navigational requirement from the safety of the deck, right under the top and without ever having to climb on the gunnel again. Simply extend the crank handle and rotate the light to the upright position or back to its stowed, towing location. The light runs on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater.
Grand Slam 900 Anchor & Stern Light
Climbing on the boat gunnel to raise and lower an anchor and stern light is dangerous, time consuming and frustrating. The GS-900 allows boat operators to lift and descend this navigational requirement from the safety of the deck, right under the top and without ever having to climb on the gunnel again. Simply extend the crank handle and rotate the light to the upright position or back to its stowed, towing location. The light runs on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater.
Features:
Safe, no-hassle raising and lowering of an anchor and stern light
Ideal for boats 39′ in length or shorter (12 meters or shorter)
Certified USCG-required for 2nm
Standard 1″-14 thread (male) shaft
LED light and shaft included
Machined/Anodized aluminum body with a light brushed finish
Polished Type-316L stainless steel crank handle
Folding crank handle locks flush into base
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Roller bearings in crank assembly
Mounts through up to 2″ thick hardtops
Includes 4″ x 1/4″ round backing plate (hardware not included)
Includes 32.75″ of tube
Light tube length allows for modification by installer to exact height
1-year limited warranty
Grand Slam 900 Anchor and amp Stern Light climbing up the ship’s gangway to raise and lower the anchor and stern lights are dangerous, time-consuming and frustrating. GS-900…
Safe, no-hassle raising and lowering of an masthead anchor light
Ideal for boats 39′ in length or shorter (12 meters or shorter)
Certified USCG-required for 3 NM
Standard 1″-14 thread (male) shaftÂ
LED light and shaft included
Water-resistance IP66 rating
Sealed piston
Machined / Anodized aluminum body with a light brushed finish
Polished Type-316L stainless steel crank handle
Folding crank handle locks flush into base
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Roller bearings in crank assembly
Mounts through up to 2″ thick hardtops
Includes 4″ x 1/4″ round backing plate (hardware not included)
Pairs with 6º Wedge Plate (WP-800-900), which is sold separately
Includes 32.75″ of tube
Light tube length allows for modification by installer to exact height
