The Garmin GHP SmartPump v2 (MPN 010-00705-62, UPC 753759189402) is Garmin’s universal autopilot hydraulic pump – one pump that fits virtually any hydraulically-steered boat from 4 to 24 cubic inch steering cylinder capacity, eliminating the traditional autopilot install problem of guessing pump size. Traditional autopilot pumps are sized to specific steering cylinder ranges, and selecting the wrong size means either sluggish rudder response (pump too small for the cylinder) or harsh / abrupt corrections (pump too large for the cylinder). The GHP SmartPump v2 solves this with configurable flow rate from 0 to 2.4 liters per minute – tune the pump output to match your specific steering cylinder during commissioning. Cylinder compatibility: 4 to 24 cubic inches (the widest range in the marine autopilot pump market). 7-second lock-to-lock rudder time for cylinders up to 17 cubic inches – exceptional rudder response speed for autopilot corrections and emergency maneuvering. The v2 (second generation) is reduced in overall size and weight from the original SmartPump while maintaining the same operational capability and corrosion-resistant construction. Corrosion-resistant components throughout: black dye on aluminum parts protects against marine environment exposure, nickel plating on all steel parts prevents rust. Fully gasketed Electronics Control Unit (ECU) housing protects the autopilot control electronics from moisture and salt spray. Universal voltage: accepts 10-30V DC input – works on both 12V and 24V marine electrical systems without modification. Auto-detects the input voltage. Current draw: less than 1 amp at standby (autopilot engaged but not actively correcting), 5-10 amps engaged (active rudder corrections), 34 amps peak (maximum load conditions). Color-coded connectors throughout for easy installation. Recommended fuse: 40A blade-type. 9-foot power cable included. Compact dimensions: 6.6 inches high x 7.5 inches wide x 10.4 inches deep. 16.5 lb shipping weight. Operating temperature range: 5F to 131F (-15C to 55C) – handles all marine ambient conditions from cold-climate winter operation to tropical summer engine room temperatures. The SmartPump v2 is the right autopilot pump for owners installing Garmin autopilot systems on hydraulically-steered boats.
The Garmin GHP SmartPump v2 is Garmin’s universal autopilot hydraulic pump – one pump that fits virtually any hydraulically-steered boat from 4 to 24 cubic inch steering cylinder capacity. It’s the solution to the traditional autopilot install problem of guessing pump size.
Why universal sizing matters. Traditional autopilot pumps are sized to specific steering cylinder ranges (typical product categories: Type 1 for small cylinders, Type 2 for medium, Type 3 for large). Selecting the wrong size means either: (1) Pump too small for the cylinder – sluggish rudder response, autopilot corrections lag the actual rudder movement, performance suffers in challenging conditions. (2) Pump too large for the cylinder – harsh / abrupt corrections that feel rough at the helm, potential damage to the steering system from over-pressure events. Operators have to know their cylinder size precisely and select pumps carefully. The GHP SmartPump v2 eliminates this problem with configurable flow rate from 0 to 2.4 liters per minute – tune the pump output to match your specific steering cylinder during commissioning. The same pump SKU works for boats ranging from small day boats to large cruisers with widely different steering systems.
Cylinder compatibility – 4 to 24 cubic inches. This is the widest cylinder compatibility range in the marine autopilot pump market. Practical translation: covers virtually every recreational hydraulically-steered boat from small day cruisers (4-8 ci cylinders) through mid-size cruising boats (10-16 ci) to large yachts (18-24 ci). For boats with cylinders outside this range (very small or very large), other autopilot pumps may be appropriate – but the SmartPump v2 covers the vast majority of recreational marine applications.
7-second lock-to-lock rudder time. The 7-second lock-to-lock rudder time (for cylinders up to 17 cubic inches) is exceptional rudder response speed for autopilot applications. Practical impact: fast autopilot corrections in challenging conditions (heavy seas, strong wind, current shifts), responsive emergency maneuvering when needed, smooth course holding even at high boat speeds. Slower competing pumps (10-15 seconds lock-to-lock) lag the autopilot’s correction commands enough to degrade course-holding accuracy in challenging conditions.
v2 improvements over v1. The second-generation SmartPump v2 delivers several improvements over the original SmartPump: (1) Reduced overall size – 6.6 x 7.5 x 10.4 inches compared to the larger original. Easier mounting in tight engine rooms and equipment cabinets. (2) Reduced weight – 16.5 lb vs heavier original. Easier handling during install. (3) Same operational capability – the v2 maintains the original SmartPump’s universal cylinder compatibility, 7-second lock-to-lock time, and corrosion resistance while reducing the physical footprint. (4) Improved thermal performance – smaller form factor with better heat dissipation. (5) Higher reliability – refined design from second-generation engineering. (6) Lower power consumption – more efficient pump operation at typical autopilot duty cycles.
Corrosion-resistant construction. The SmartPump v2 is engineered from corrosion-resistant components throughout: (1) Black dye on aluminum parts – protects the aluminum housing components against marine environment exposure (salt spray, humidity, condensation). Standard aluminum corrodes in marine service. the dyed surface treatment prevents this. (2) Nickel plating on all steel parts – prevents rust on the steel components. Standard steel rusts quickly in marine service. the nickel plating extends service life dramatically. (3) Fully gasketed Electronics Control Unit (ECU) housing – protects the autopilot control electronics from moisture and salt spray. (4) Aluminum alloy manifold and motor housing – the lightweight high-strength aluminum is appropriate for marine service when properly treated. The corrosion-resistant construction matters for boats in continuous saltwater service where the SmartPump v2 may operate continuously for years.
Universal voltage 10-30V DC. The pump accepts 10-30V DC input – works on both 12V boat electrical systems (typical recreational boats) and 24V systems (typical larger boats and commercial vessels) without modification. Auto-detects the input voltage and adjusts internally. Practical benefit: one pump SKU works for both voltage systems, no voltage-specific variants to stock or order. For boats considering future electrical system upgrades (12V to 24V), the SmartPump v2 doesn’t need replacement when the boat voltage changes.
Current draw – efficient at typical loads. Standby: less than 1 amp (autopilot engaged but not actively correcting rudder). Engaged: 5-10 amps (active rudder corrections during normal cruising). Peak: 34 amps (maximum load during heavy seas or rapid corrections). Practical battery impact: typical autopilot operation in moderate seas averages 2-4 amps continuous over time (pulses between standby and engaged states as the autopilot corrects). For 8 hours of autopilot operation, total consumption is 16-32 amp-hours – well within typical marine house battery capacity. The peak 34 amp current matters for fuse sizing – install the 40A blade fuse to handle peak loads safely.
Color-coded connectors for easy install. All electrical connectors are color-coded throughout the SmartPump system – power cable, autopilot brain cable, control inputs. Practical install benefit: substantially reduces installation errors and time. Each connector pairs with its matching color-coded mate, making misconnection impossible. For autopilot installers who handle multiple installations, the color coding speeds up routine install work. For DIY installers, the color coding reduces the chance of incorrect wiring that could damage the autopilot system.
Operating temperature range. The pump operates reliably from 5F to 131F (-15C to 55C) – covers all marine ambient conditions from cold-climate winter operation through tropical summer engine room temperatures. The wide temperature range matters for boats stored / operated in extreme climates where engine room temperatures can exceed 100F or freeze in winter. The pump itself handles these conditions. for cold-weather operation, the hydraulic fluid grade should match the operating temperature range (synthetic hydraulic fluids are typical for cold-climate use).
Garmin autopilot ecosystem integration. The SmartPump v2 is part of Garmin’s marine autopilot ecosystem – integrates with Garmin autopilot brains (GHC controllers), Garmin chartplotters (for autopilot control from the chartplotter interface), Garmin VHF radios (for DSC integration), and other Garmin marine electronics. For boats running Garmin marine electronics, the SmartPump v2 is the standard autopilot pump choice. For non-Garmin autopilot systems, dedicated pumps from those brands are typically more appropriate (the SmartPump v2 communicates via Garmin-specific protocols).
Install. Plan for 6-10 hours for an experienced installer. Tasks: (1) Mount the pump in the engine room or hydraulic equipment cabinet using stainless mounting hardware. (2) Plumb hydraulic lines from the pump’s output ports to the existing steering system using marine-grade hydraulic hose. (3) Wire 12V or 24V power to the pump through the supplied 9-foot power cable with a 40A blade fuse. (4) Connect the autopilot brain cable to the pump’s color-coded control connector. (5) Configure the pump’s flow rate setting during initial commissioning to match your specific steering cylinder size. (6) Bleed the hydraulic system to remove all air. (7) Sea-trial the autopilot to verify proper operation across the full speed range and rudder authority.
Warranty. Garmin standard 2-year limited warranty applies (with extended warranty available as a purchase option). Save the receipt and the original packaging. Warranty service runs through Garmin’s authorized service network worldwide. Most field failures Garmin sees in the SmartPump line are install-related (incorrect flow rate configuration causing performance issues, undersized power wiring, air in hydraulic lines causing pump damage) rather than pump defects – careful install delivers many years of reliable service.
