B&G’s flagship Zeus SR 16-inch sailing chartplotter without built-in sonar. The Zeus SR puts a Qualcomm 8-core processor behind a 1200-nit SolarMAX IPS touchscreen, adds a rotary dial and dedicated keypad alongside multi-touch, and runs B&G’s sailing-tuned operating system with SailSteer, laylines, polars, and race timer. Ships preloaded with C-MAP Discover X for U.S. and Canada.
The Zeus SR 16 is the new generation of B&G’s Zeus SR combo chartplotter line, redesigned inside and out to replace the long-running Zeus3S. The big architectural change is a Qualcomm 8-core processor that drives a redesigned operating system, paired with hybrid hardware that lets you control the display three ways: multi-touch on the screen, a rotary dial for fast menu scrolling, and a dedicated keypad for one-tap access to common functions. For owners of mid-to-large sailing yachts who’ve been running an evo3S and want the upgrade, this is the natural next step.
The display itself is a 16-inch SolarMAX IPS panel at 1920 by 1080 pixels with greater than 1200 nits of brightness and 80-degree viewing angles in every direction. Polarized-sunglasses behavior is built in (the IPS film is rotated so the screen doesn’t go dark when you look at it through polarized lenses), and the glass-to-edge bezel design takes up less helm real estate than the older Zeus3S 16 for the same active screen area. Optical bonding prevents internal fogging in the heat, and the IPX6 / IPX7 rating handles spray, washdown, and short-duration immersion.
The three-control system is the headline ergonomic change. The touchscreen is the primary interface for chart pan, pinch-zoom, and tap-to-select operations, and it’s noticeably smoother on this generation thanks to the new processor. The rotary dial sits beside the screen and scrolls through menus, list views, range adjustments, and instrument-bar values without you having to hunt for an on-screen slider. The keypad provides dedicated keys for the functions you use most: pages, menus, waypoints, escape. For installations where the helmsman wears gloves, or for rough-water situations where a finger on glass is hard to land accurately, the rotary and keypad are real ergonomic wins.
The processor is genuinely faster. B&G rates the Zeus SR generation at substantially quicker page loads versus the iMX 8 in the evo3S, smoother chart panning, and faster auto-routing. In practical helm use, this shows up as zero-lag app switching when you jump from chart to sonar to radar, and as instant rendering when you scroll a long chart at high zoom levels. The 8-core architecture also handles split-screen layouts more gracefully, you can run a quad-split with chart, radar, sonar, and instruments all live without the lag the older processor had under that load.
The built-in sonar engine is unchanged in capability but improved in handling. Two 9-pin Xsonic transducer ports give you a dual-channel 1 kW CHIRP echo sounder with Low, Medium, and High CHIRP bands plus dedicated Downscan (455 / 800 kHz plus 700 kHz and 1200 kHz CHIRP) and Sidescan (455 / 800 kHz plus 455 kHz and 1200 kHz CHIRP) on the imaging port. Active Imaging and Active Imaging HD are supported natively, and the S3100 (sailing module) and S5100 (high-power deep-water module) network in over Ethernet for installations that need more than the built-in sonar can deliver.
Networking is a generational upgrade. The Zeus SR 16 has one X-Coded M12 Gigabit Ethernet port (which is the modern, sealed Ethernet connector replacing the older yellow 5-pin), plus a legacy yellow 5-pin Ethernet port for backwards compatibility with older B&G accessories. NMEA 2000 carries engine, fuel, instrument, and AIS data. HDMI Video In handles a remote camera feed or an external video source. The display supports IPCAM-1, the FLIR M232/M300 series, and any ONVIF-compliant IP camera for thermal and IP video. Wi-Fi 5 (802.11ax) handles app mirroring and over-the-air software updates.
Charting comes preloaded with the C-MAP Discover X chart card for North America, which is the new C-MAP X-gen format with substantially higher-resolution coastal and inland coverage than the older C-MAP MAX-N+ cards. The display upgrades cleanly to C-MAP Reveal X, which adds high-resolution bathymetric shaded relief, plus third-party charts from CMOR and StrikeLines. Two microSD card slots handle card upgrades and waypoint backup. The Zeus SR 16 can store 10,000 waypoints, 75,000 track points, 75 saved tracks, and 125 routes.
Integration is broad. HALO dome and open-array radars all connect over Ethernet. The B&G H5000 instrument system pairs natively, as do other compatible NAC-series autopilots and other compatible NAC-series autopilots motors for owners who already run those. NAC-1, NAC-2, NAC-3, and NAC-D autopilot computers are all supported. SiriusXM marine weather works through the WM-4 receiver module. Mercury SmartCraft Connect, CZone digital switching, and the B&G app on phone or tablet round out the ecosystem.
Power and physicals. The Zeus SR 16 runs from 12 or 24V DC nominal, tolerates 10 to 31.2V, draws a maximum of 43.5 W, and uses a 5 A recommended fuse. Operating temperature spans -15 C to +55 C. Display-only dimensions are 423.5 mm wide by 241.6 mm tall by 88.6 mm deep (16.67 by 9.51 by 3.49 in), and weight is 3.8 kg (8.38 lb). The bracket and panel mount kits both ship in the box.
The Zeus SR is the sailing-tuned member of B&G’s Zeus chartplotter family, on the same hardware platform as the powerboat-focused Zeus SR but running a different firmware image. SailSteer is the headline feature, combining true and apparent wind direction, heading, course over ground, and laylines on a single dial that lets the helmsman steer to the wind angle that gets the boat where it wants to go on the next tack. Pre-loaded polars (or a custom polar uploaded from a B&G H5000 tuning session) drive optimum-angle suggestions in real time. The start-line race timer with adjustable line bias handles tactical starts. Tide and current overlays paint the moving water across the chart in arrow form so you can plan a layline that accounts for the set.